Malaysia Industrial Hose Manufacturer

Malaysia industrial hose Manufacturer

industrial hose covers the broad spectrum of fluid transfer lines including flow lines for
fluids and gases in pneumatic, hydraulic, or process applications, or specialized uses in heavy
industry such as mining, geotechnical, and construction. industrial hose is generally flexible
and frequently reinforced; there are many reinforcement materials and geometries. Industrial
hose is usually application-specific; consultation with hose manufacturers regarding specific
applications is typical.
Typical applications or media handled by industrial hose include general purpose, agricultural,
aviation or aerospace, chemical, construction, coolant, cryogenic, discharge, exhaust, fire
hose, food and beverage processing, fresh air, garden or landscaping, heavy industry, high
viscosity, HVAC, hydraulic, marine, medical or pharmaceutical, oil or fuel, pneumatic, powder or
granules, refrigerant, sanitary, slurry, solids, steam, suction or vacuum, vapor or smoke or
fumes, and water.
Important dimensions for the selection of industrial hose include the design units, inside
diameter, and outside diameter. Design units can be English such as inches or fractions of an
inch, or metric such as millimeters or centimeters. The inside diameter refers to the inside of
the hose or liner. The outside diameter is often a nominal specification for hoses of
corrugated or pleated construction. Important performance specifications to consider when
searching for industrial hose include working pressure, maximum vacuum, minimum bend radius and
temperature range. The working pressure is the maximum service design pressure. Maximum rated
vacuum is most frequently given in inches or mm of mercury referenced below one standard
atmosphere. Minimum bend radius is based on a combination of acceptable hose cross-section
deformation and mechanical bending limit of any reinforcement. The temperature range is the
full required range of ambient operating temperature.
Construction options for industrial hose include reinforced, coiled, corrugated or convoluted,
articulated, and multi-element. Reinforced hose is constructed with some element of
reinforcement; styles include textile braid, wire braid, wire helix, and many other designs in
many ply or layer configurations. Coiled industrial hose is coiled for flexibility and
elasticity; this feature often makes it expandable and easy to store. Corrugated hose contains
corrugations, pleats, or spiral convolutions to increase flexibility and capacity for
compression and elongation. Articulated industrial hose is rigid hose sections that are
constructed with "joints" that can be swiveled, positioned, or articulated; often used in cases
where hose discharge must be aimed, such as coolant delivery to a workpiece. A multi-element
hose is constructed of more than one hose formed or adhered together in a flat, ribbon, or
bundled configuration. Additional features to consider include integral end connections, anti-
static, lay flat, crush proof, flame resistant, and explosion-proof.